Make Bootable Pen Drive using dos for windows 7
Install Window 7/8 within 5 minutes from Pen Drive (using dos)
Hey friends, in this article I am going to explain you how to install window 7 to your computer from Pen Drive. You are now thinking that why should we install windows from USB/Pen Drive?
When I can just pop up a DVD
I bought and install that way. Well
the difference is that the Pen Drive is based on flash memory the read/write speed will be significantly faster than any DVD. So you can easily install windows within 5-10 minutes instead of 20-30 minutes. So let start and just follow the steps given below:
°Insert your pen drive into the
computer which should be 4 GB
(Gigabytes) or more.
°Empty/Format the pen drive.
°Open the command prompt and make sure you should “Run as
administrator” otherwise this will notwork.
°Now type in command prompt
“diskpart” and press enter.
°Now you have a new prompt called “DISKPART” now type in it “list disk” and press enter. Make sure don’t select your main hard drive.
°Now type “select disk 5” and press enter.
°Note: 5 is that drive where we want to install windows it may be anything.
°Now you see “Disk 5 is now the
selected disk”.
°Now type “clean” and press enter.
This will clean the disk.
°Now type “create partition primary” and press enter.
°Now you see “Disk part succeeded in creating the specified partition”.
°Now type “select partition 1” and press enter.
°Now type “active” and press enter.
°Nowyou see “Disk part marked the current partition is active”.
°Now type “format fs=NTFS quick” and press enter.
Note: make sure use quick at the end otherwise the format take very much time.
°Now you see “Disk part successfully formatted the volume”.
°Now type “assign” and press enter.
°Now you see”Disk part successfully assigned the drive letter or mount point”.
°Now type ”exit” and press enter. And type “exit” ones more.
°Now open up the Pen drive. Now you have to drag the contents of windows 7 DVD into the pen drive or you may have to extract them from the DVD into yourFlash memory.
After copy all the contents of
windows 7 into the pen drive just
reboot your computer. And make sure it will set to boot from a Flash Drive.That’s all you should now install your windows from a Pen Drive. Just choose usb drive as first boot drive in BOIS If you like this article
please do share it by by clicking on
any social button & don't forgot to
comment. keep visiting...
Install Window 7/8 within 5 minutes from Pen Drive (using dos)
Hey friends, in this article I am going to explain you how to install window 7 to your computer from Pen Drive. You are now thinking that why should we install windows from USB/Pen Drive?
When I can just pop up a DVD
I bought and install that way. Well
the difference is that the Pen Drive is based on flash memory the read/write speed will be significantly faster than any DVD. So you can easily install windows within 5-10 minutes instead of 20-30 minutes. So let start and just follow the steps given below:
°Insert your pen drive into the
computer which should be 4 GB
(Gigabytes) or more.
°Empty/Format the pen drive.
°Open the command prompt and make sure you should “Run as
administrator” otherwise this will notwork.
°Now type in command prompt
“diskpart” and press enter.
°Now you have a new prompt called “DISKPART” now type in it “list disk” and press enter. Make sure don’t select your main hard drive.
°Now type “select disk 5” and press enter.
°Note: 5 is that drive where we want to install windows it may be anything.
°Now you see “Disk 5 is now the
selected disk”.
°Now type “clean” and press enter.
This will clean the disk.
°Now type “create partition primary” and press enter.
°Now you see “Disk part succeeded in creating the specified partition”.
°Now type “select partition 1” and press enter.
°Now type “active” and press enter.
°Nowyou see “Disk part marked the current partition is active”.
°Now type “format fs=NTFS quick” and press enter.
Note: make sure use quick at the end otherwise the format take very much time.
°Now you see “Disk part successfully formatted the volume”.
°Now type “assign” and press enter.
°Now you see”Disk part successfully assigned the drive letter or mount point”.
°Now type ”exit” and press enter. And type “exit” ones more.
°Now open up the Pen drive. Now you have to drag the contents of windows 7 DVD into the pen drive or you may have to extract them from the DVD into yourFlash memory.
After copy all the contents of
windows 7 into the pen drive just
reboot your computer. And make sure it will set to boot from a Flash Drive.That’s all you should now install your windows from a Pen Drive. Just choose usb drive as first boot drive in BOIS If you like this article
please do share it by by clicking on
any social button & don't forgot to
comment. keep visiting...
No comments:
Post a Comment